Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Duct Repair & Sealing Across Murray Hill
If your apartment heats unevenly, whistles at the register, or leaves a cold draft along the baseboard, the ducts are the place to look first. We handle duct repair & sealing in Murray Hill with a process built for pre-war buildings: coordinating access with the super, working inside occupied apartments, and documenting what we seal before the walls close back up. Call (877) 792-6029 and we’ll set up a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Murray Hill Homeowners Call Sunnyside Air Duct Cleaning for Duct Repair & Sealing
Murray Hill is not a suburb of single-family houses with an attic air handler, and we don’t treat it like one. The neighborhood’s 1920s – 40s masonry towers, many of them along the blocks between Lexington and Third, have ducts that were retrofitted into tight utility chases decades after the buildings went up. Repairing them takes a different set of habits than a house with open joist bays.
Those habits are why people in Murray Hill call us back. We use professional-grade Rotobrush and Nikro equipment rather than shop-vac setups, and Abatement Technologies containment on site so a sealing job doesn’t redistribute soot into a neighbor’s apartment. Our technicians have up to 9 years of experience reading how a retrofit run is actually hung inside a chase.
Murray Hill customers tend to ask the same question: how do I know it was done? That’s the right question. We show our work with photos of the runs before and after, and you get one flat price per system agreed before anything starts. No per-vent games. No surprise line items once the technician is in your hallway.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Our Duct Repair & Sealing Services in Murray Hill
Most repair calls in Murray Hill come down to one of these four jobs. Each is quoted as a single system price, so you know the number before we open a panel.
Duct Sealing
Sealing is the core of what we do in Murray Hill’s co-op towers, because the leaks here are usually at joints, boots, and chase penetrations rather than mid-run. We seal with mastic and mechanical fastening so the repair holds through the seasonal cycling that pre-war buildings see. It’s the fix that stops the winter draft and the summer condensation at the same time.

Flex Duct Repair
A lot of Murray Hill units have mid-century flex runs dropped into original plaster-and-masonry chases, and those runs pull loose at the boot where the shaft meets the wall. We repair and re-secure the connection rather than patching over it. Where the flex has collapsed or torn, we replace the section and re-hang it so it doesn’t sag back into the same failure.

Metal Duct Repair
Original metal trunk lines in these buildings are often still in service, and their mastic and tape seals fail after years of humid summers and cold winters. We reseal seams and joints on the trunk, then check the branch takeoffs. On older trunks we also look for pitting where condensation has sat against the metal.

Duct Insulation
Bare metal runs in a cold chase sweat in summer and lose heat in winter. We wrap exposed sections and seal the boot-to-wall gap on the interior side, which is usually where a Murray Hill apartment loses its comfort. Insulation work in a tight chase is scheduled around access, not rushed through it.
Trusted Brands We Service in Murray Hill
We work with professional equipment from Rotobrush, Nikro, and Abatement Technologies, and we’re familiar with Honeywell and Aprilaire air-quality systems when a repair turns into a filtration conversation. We don’t claim to stock parts for any brand, and we won’t pretend a run is repairable when it needs replacement. What we can do is inspect, diagnose, and get the right answer fast, with a written estimate that spells out what’s being replaced and what’s being sealed. If a repair leads to a Honeywell or Aprilaire upgrade later, it stays with one company instead of three.
Common Duct Repair & Sealing Problems We See in Murray Hill Homes
The failures here repeat in patterns that track the building stock and the weather.
- Retrofit flex runs pulling loose at the boot. On mid-century retrofit shafts meeting original plaster walls, the flex connection works loose and lets cold air backdraft into the unit all winter. The unit owner usually blames the HVAC when the real fault is the boot.
- Mastic and tape failing on metal trunks. Heavy seasonal cycling between humid summers and cold winters dries out old seals on metal trunk lines. A seam that held for years can open up quietly and send conditioned air into the chase.
- Masonry soot from shared flues migrating into chase runs. Because many Murray Hill buildings sit atop 1910s steam tunnels and original utility chases, ducts in those chases pick up decades of masonry dust and soot from the building’s own chimney flues. Sealing without cleaning that soot first just traps it.
- Chase access panels opened without the super’s sign-off. Those panels belong to the building, not the unit, and touching one without coordination can turn a small repair into a neighbor complaint and a co-op board issue.
How a Typical Repair Call in Murray Hill Usually Goes
A typical Murray Hill repair call starts with a unit that heats unevenly or whistles at the registers. Often it’s a disconnected flex run or a boot pulled loose where a mid-century retrofit shaft meets the original plaster wall, made worse by seasonal condensation and cold-air backdraft. A qualified local pro coordinates access with the building super before touching any riser or chase panel, then runs a camera inspection of the supply and return ducts, confirms the fault, and reseals with mastic and proper mechanical fastening rather than tape alone. Where the air handler sits in a tight closet, they also verify the blower motor compartment and filter slot are sealed, since leaks there quietly undo the rest of the job.
The One Thing That Makes Murray Hill Different
In Murray Hill’s 1920s – 40s masonry towers, many duct runs are mid-century retrofits squeezed into original utility chases shared with chimney flues. Sealing work here has to account for masonry soot and for chase access panels that belong to the building rather than the unit. And the super, not the homeowner, typically controls whether a riser or chase panel gets opened. That single fact changes how a job is scheduled, who gets a phone call, and what documentation is worth having afterward. A generic duct repair page will never mention it, which is exactly why repairs go sideways in these buildings.
See the difference
Before
After
Before
After
Before
AfterPricing for Duct Repair & Sealing in Murray Hill, NY
Costs in Murray Hill run a little higher than in detached-home neighborhoods because access, containment, and building coordination all take real time. Here’s what a typical job looks like:
| Service | Typical Murray Hill range |
|---|---|
| Targeted duct sealing (single system) | $450 – $900 |
| Flex duct repair or reconnection at the boot | $250 – $600 |
| Metal trunk resealing and joint repair | $400 – $850 |
| Duct insulation on exposed chase runs | $350 – $800 |
| Full system reseal with camera verification and photo report | $900 – $1,800 |
What moves the number: how many systems the unit has, how much of the run is reachable without opening a chase panel, whether soot has to be cleaned before sealing, and whether building coordination is needed for riser access. The estimate is free, and the written estimate sets the final price. Call (877) 792-6029.
We Also Serve Cities Near Murray Hill
We work throughout Murray Hill and in the neighborhoods around it: Kips Bay, Midtown, the Upper East Side, and Long Island City. If your building is near the neighborhood’s eastern edge, the same pre-war construction issues usually apply. Call and we’ll confirm coverage.
Serving Murray Hill, NY – Our Local Coverage Area
We serve Murray Hill and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Duct Repair & Sealing in Murray Hill
Yes, if the work touches a riser or a chase access panel, and in most Murray Hill buildings it will. Those panels belong to the building, and the super typically controls whether they get opened. We coordinate that before the visit, because a small repair that skips that step tends to become a board issue. Call (877) 792-6029 for an exact quote; estimates are free.
Cold-air infiltration in Murray Hill apartments usually comes from a boot that has pulled loose where a mid-century retrofit shaft meets the original plaster wall. Seasonal cycling between humid summers and cold winters widens that gap each year, and what the unit owner notices is a draft they blame on the HVAC. Sealing the boot and the wall penetration fixes it. Call (877) 792-6029 and we’ll set up a free estimate.
Yes, with camera inspection and photos of the runs before and after sealing. In Murray Hill, where most of the ductwork lives inside chases and plaster walls, that documentation is the only way a homeowner can confirm the work happened. We show our work as a matter of course, not as an extra. Call (877) 792-6029 for a free estimate.
Clean work in an occupied Murray Hill apartment means containment on site before anything is opened, floor protection, and debris bagged and removed rather than swept into a corridor. We use Abatement Technologies containment equipment so soot from a shared flue doesn’t end up in your neighbor’s unit. Expect a short written scope and one flat price per system. Call (877) 792-6029 to schedule an estimate.
The air handler closet needs sealing too, and in a Murray Hill apartment it often matters more than the ducts themselves. A blower motor compartment or filter slot that leaks pulls unconditioned air straight into the system and quietly undoes the rest of the sealing work. We check both before signing off. Call (877) 792-6029 for a free estimate.
Most Murray Hill jobs land between $250 and $1,800 depending on the service, with a full system reseal and photo report at the top of that range. Small flex reconnections sit near the bottom; jobs that need chase access, soot removal, and multiple systems cost more. The written estimate sets the final price. Call (877) 792-6029.
Cheap quotes in Murray Hill usually mean tape instead of mastic, no containment, and no photo documentation, which is exactly the work you can’t inspect. What you get is a number, not a verified seal. One flat price per system and before-and-after photos of your own ducts is the way to compare fairly. Call (877) 792-6029 for a real estimate.
In Murray Hill’s pre-war buildings, a reseal every several years is realistic when the ducts were retrofitted into older chases, and any time you notice a whistle, a draft, or uneven heating. Condensation and cold-air backdraft speed up seal failure. An inspection tells you whether it’s repair or just cleaning. Call (877) 792-6029 for a free estimate.
Get a Free Duct Repair & Sealing Estimate in Murray Hill
If your Murray Hill apartment is whistling, drafting, or heating one room and not another, we can tell you why. Call (877) 792-6029 for a free estimate. We answer 24/7, and we dispatch Sunday through Friday, 7am to 7pm. One flat price per system, agreed before work starts.
Written by the team at Sunnyside Air Duct Cleaning.